捕鱼上线送10000亿金币无需登录

半刚/半柔线缆下线机WJ600-CT AUTO CUTTING SYSTEM Winton WJ600-CT

WJ600-CT AUTO CUTTING SYSTEM
Winton WJ600-CT半刚/半柔线缆下线机

\

WJ600-CT是针对半刚性/半柔性/波纹电缆的全自动切割机,具有自动进料、可设定切割长度和切割数量等功能。该设备最大切割速度可达每分钟350mm,并且可在一秒内完成切割。专门配备2组气动线缆夹持爪,切割时紧紧夹住线缆,避免电缆晃动,确保切割端面平整,且不会在外导体表面留有划痕或外型损伤。

Standard Equipment
系统配置:


Microprocessor controlled
全自动微处理器控制,具有手动和自动进线功能

Closed loop feedback system used to feed material forward
进料机构自动反馈系统

2500 rpm saw used to cut material, dry cutting process
该设备使用的是高硬度合金刀片锯片转速达到2500 rpm,无需润滑剂

闭环反馈控制结合高精度进线长度测量机构,重复精度高达± 0.25 mm (0.010 in)

Programmable electric cross feed speed for cutting (1 thru 20)\
电机驱动进刀/退刀,速度可调(1-20)

Programmable material feed rate (1 thru 5)
进料速度可调(1-5)

Programmable part cut length (inch/millimeters)
切割长度可设定(单位:英寸或毫米)

Programmable number of parts to cut
切割数量可设定

Programmable saw cut time
锯片切割时间可设定

(2) pneumatic grippers for material support while cross feed is cutting material
切割时2组气动线缆夹持爪夹紧线缆,减少电缆晃动,确保端面平整

Bench top mounted
体积小巧,可放置于桌面
\Material low indicator switch used to detect end of material/bar stock
缺料传感器,随时监测进料状态

Front interlocked guard (guard must be in position to operate saw)
前面板安全保护罩传感器(必须在关闭状态下设备才能运行)

(1) feed roll, customer specified size
一个通用进料主动轮

(1) High Speed Steel Saw Blade included
1片高速钢锯片

(1) set of gripper pads included, customer specified size
一组线缆夹持爪

(1) Set of 6’ Material Supports Included
一个6英寸线缆支撑导块


Features/Specifications - Standard:
性能特点/技术参数:


\

M600 Power Straightener (Ø6mm capacity)
M600 电动校直系统: 
            

9 rolls in (1) vertical plane, assembly docks to WJ600-CT for rigid performance
9个垂直排列矫直轮,用于WJ600-CT前道矫直工序,适用于半刚/半柔性线缆

Powered roll dies synchronized to WJ600-CT
电力驱动,且可与WJ600-CT运行中实现同步
\
Adjustable top rolls for true alignment
可调节的上半部矫直轮,适用于不同线径和材质

All guards included
多重安全保护

Maximum material feed speed is 5 inches per second
最大校直速度可达每秒127mm

Additional 24V DC power supply for power feed
24VDC输出,可为放线机供电

Set of roll dies included
整套校直轮

Vertical feed in on bulk material required
可垂直进料,适用于大批量线缆校直

Bulk spool support included
放线缆盘支架

Baidu
sogou